Finishing Degrees for

Multi Jet Fusion

The right finish and color can transform a print into a product. Multi Jet Fusion parts have a stone-grey color and a smooth finish right out of the machine, which can be further smoothed and dyed darker.

Standard/Unpainted Finishes

Normal

PA 12, Ultrasint TPU 90A-01

  • Loose powder removed
  • Sandblasted

Smooth

PA 12

  • Loose powder removed
  • Sandblasted
  • Smoothed: Your part is mechanically polished by being put into a tumbler with pebbles that smooth your part while the tumbler vibrates at a high frequency.
    • We can only smoothen the A-side (the outside of your part), it’s not possible to completely polish the inside
    • The polishing process will take 0.1 mm of material off your part, so add extra wall thickness to avoid any problems
    • Small details and thin walls could be worn away and may even disappear
    • Edges will be rounded and your part will become less’ crisp’ once polished
    • The process is limited to parts ranging from ±30 to 200 mm

 

Read our design guidelines about smoothing

 

Color Dyed Finishes

Color Dyed

PA-12

  • Loose powder removed
  • Sandblasted
  • Dyed: Your part is submerged in a bath containing color pigment.

Color Dyed

Ultrasint TPU 90A-01

  • Loose powder removed
  • Sandblasted
  • Dyed: Your part is submerged in a bath containing color pigment.

Smooth + Color Dyed

PA-12

  • Loose powder removed
  • Sandblasted
  • Smoothed: Your part is mechanically polished by being put into a tumbler with pebbles that smooth your part while the tumbler vibrates at a high frequency.
    • We can only smoothen the A-side (the outside of your part), it’s not possible to completely polish the inside
    • The polishing process will take 0.1 mm of material off your part, so add extra wall thickness to avoid any problems
    • Small details and thin walls could be worn away and may even disappear
    • Edges will be rounded and your part will become less’ crisp’ once polished
    • The process is limited to parts ranging from ±30 to 200 mm
  • Color Dyed

 

Read our design guidelines about smoothing

 

Spray Paint (A/2 Side)

Ultrasint TPU 90A-01

  • Loose powder removed
  • Sandblasted
  • Black Ultracur3D Coating (Dead Matt) applied on the A-Side or both sides